Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018) - MarketsandMarkets

Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018)

Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018) - MarketsandMarkets
Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018)
Published May 01, 2013
240 pages — Published May 01, 2013
Price US$ 4,650.00  |  Buy this Report Now

About This Report

  
Abstract:

Since its advent in 1957, the early adopters of laser (light amplification by simulated emission of radiation) technology were applications such as; ranging, targeting, spectroscopy, and microscopy. The purpose of these applications was either the exploration/measurement of distances or the scientific/laboratory experiments. None of the above mentioned application promoted laser technology on the commercial front such as laser processing. However, with the technological developments, lasers became compact, robust, and versatile. Such developments triggered the industrial and commercial applications such as; micro-machining, modeling, precise sculpting, shaping & sizing objects and materials, and contactless imprinting which now are collectively referred to as laser processing applications.

The revenue generated from laser processing applications is supported by five critical pillars - laboratory equipments, defense & military, compact disc read/write heads, communications, and material processing. The research study, Laser Processing Market (2013 - 2018) analyses the vital material processing segment. The analysis is complemented by qualitative as well as quantitative data; latter being further divided into sales value, sale volume, and average selling price (ASP) data sets. Each of the data set contains historical, estimated, and forecasted values. The total market is segmented according to the technology, techniques, machine configuration, vertical, and geography.

Segmentation is done considering the supply side as well as the demand side market parameters. Segments such as technology, techniques, and machine configuration define the supply side market, whereas, vertical, application, and geography segments define the demand side market. The technology segmentation divides the market according to the various laser technologies such as CO2 laser, solid state lasers, fiber lasers, and excimer lasers. On the other hand, the machine configuration segment describes how the above mentioned lasers are used. Three types of configurations; moving material, flying optics, and hybrid, along with the mode of operation are covered in the report. Depending on the material type, lasers can be used in continuous mode or in a pulsed mode. The laser market data covered for various technology segments is mutually exclusive.

The major supply side segment is the technique which includes laser cutting, laser drilling, laser engraving, and laser marking. These four types of techniques have replaced the tradition mechanical processing techniques on a large scale. Depending on the application, base material type, and laser type, one can select a suitable laser processing technique. Though, techniques are different, the application market for each type wont be mutually exclusive since multiple techniques may be applied to same the product/application. The chapter also includes the level-2 segmentation of the techniques, giving descriptive data sets for various types of drilling (single pulse, percussion, trepanning, helical), cutting (fusion, flame, sublimation), and marking (masking, carbon migration, bonding).

Amongst the demand side segments, application segment is of the prime importance. The report discusses various applications with their respective impacts on the total market, cannibalization factor, year-on-year growth trend, and TAM/SAM data. Laser processing applications are also divided according to the processing techniques employed, allowing the reader to analyze each of the micro-markets individually. For example, the report differentiates between the automotive application market for laser drilling and automotive application market for laser cutting. Apart from the automotive segments, other major verticals considered for the analysis are aerospace, architecture, commercial, consumer electronics, and semiconductor & electronics.

  
Source:
Document ID
SE 1516
Industry
Format:
PDF Adobe Acrobat
Buy Now

Sections

Title
Table Of Contents

1 Introduction (Page No. - 18)
1.1 Key Take-Aways
1.2 Report Description
1.3 Markets Covered
1.4 Stakeholders
1.5 Report Assumptions
1.6 Research Methodology
1.6.1 Market Size Estimation
1.6.2 Market Crackdown And Data Triangulation
1.6.3 Key Data Points Taken From Secondary Sources
1.6.4 Key Data Points Taken From Primary Sources
1.6.5 List Of Major Companies And Organizations Covered In Primary Research

2 Executive Summary (Page No. - 29)

3 Cover Story (Page No. - 32)

4 Market Overview (Page No. - 35)
4.1 Introduction
4.2 Market Definition And Scope
4.3 Market Segmentation
4.4 History & Evolution Of Laser Cutting, Drilling, Marking and Engraving Market
4.5 Technology And Application Trends
4.6 Advantages Of Laser Material Processing
4.7 The Industrial Safety Factors
4.7.1 Maximum Permissible Exposure (MPE) Levels
4.7.2 Classification
4.7.2.1 By IEC Standard
4.7.2.2 By ANSI Standard
4.8 Market Dynamics
4.8.1 Drivers
4.8.1.1 Government Regulations For Compulsory Use Of Laser Marking
4.8.1.2 Outclassing Every Other Substitute Tools
4.8.1.3 Demand For The Aesthetics
4.8.1.4 Emerging Application In Oil And Gas Exploration Field
4.8.1.5 The Introduction Of Direct Diode Lasers
4.8.2 Restraints
4.8.2.1 High Initial Investment And High Maintenance Cost
4.8.2.2 Eurozone Crises
4.8.2.3 Rare Earth Elements Mining: Environmental Concerns
4.8.3 Opportunities
4.8.3.1 High Adoption Of Disk Lasers
4.8.3.2 Automotive Lights
4.8.3.3 Other Emerging Applications And Processes
4.9 Burning Issues
4.9.1 Technical Challenges With High Power Lasers
4.9.2 Safety Issues With Lasers
4.10 Winning Imperatives
4.10.1 Product Innovation Is The Key
4.10.2 Vertical Consolidation
4.10.3 Laser Doping Of Solar Cells (Lassol): Technology For Solar Cells
4.11 Porter's Five Forces Model
4.11.1 Threat From New Entrants
4.11.2 Threat From Substitutes
4.11.3 Bargaining Power Of Suppliers
4.11.4 Bargaining Power Of Buyers
4.11.5 Degree Of Competition
4.12 Value Chain
4.13 Price Trend Analysis

5 Segmentation By Technology (Page No. - 74)
5.1 Introduction
5.2 Lasers Source And Laser System Market Comparison
5.3 Gas Lasers
5.3.1 Co2 Lasers
5.3.2 Excimer Lasers
5.4 Solid State Lasers
5.4.1 ND:YAG Laser
5.4.2 ER: YAG Laser
5.5 Fiber Lasers
5.6 Semiconductor Lasers

6 Segmentation By Process (Page No. - 100)
6.1 Introduction
6.2 Cutting And Drilling
6.2.1 Cutting
6.2.1.1 Fusion Cutting
6.2.1.2 Flame Cutting
6.2.1.3 Sublimation Cutting
6.2.2 Drilling
6.2.2.1 Single Pulse Drilling
6.2.2.2 Percussion Drilling
6.2.2.3 Trepanning Drilling
6.2.2.4 Helical Drilling
6.3 Marking And Engraving
6.3.1 Direct Laser Engraving
6.3.2 Direct Photopolymer Laser Imaging
6.3.3 Sub Surface Laser Engraving
6.4 Micro-Processing
6.5 Advanced Processing

7 Segmentation By Machine Configuration (Page No. - 121)
7.1 Introduction<

Table Of Contents

MarketsandMarkets—Worldwide, market research reports primarily sold for numbers, market segmentation and competitive landscape, within the business leaders.

About the Author


Cite this Report

  
MLA:
MarketsandMarkets. "Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018)" May 01, 2013. Alacra Store. Nov 16, 2026. <http://www.alacrastore.com/storecontent/MarketsandMarkets/Laser-Cutting-Drilling-Marking-and-Engraving-Market-by-Technology-Co2-Laser-Excimer-Laser-ND-YAG-Laser-Fiber-Laser-Base-Material-Metals-Polymers-Application-Electronics-Machine-Part-Marking-Medical-Signage-Geography-2013-2018-2144-113>
  
APA:
MarketsandMarkets. (2013). Laser Cutting, Drilling, Marking and Engraving Market by Technology (Co2 Laser, Excimer Laser, ND: YAG Laser, Fiber Laser); Base Material (Metals, Polymers); Application (Electronics, Machine Part Marking, Medical, Signage) & Geography- (2013 - 2018) May 01, 2013. New York, NY: Alacra Store. Retrieved Nov 16, 2026 from <http://www.alacrastore.com/storecontent/MarketsandMarkets/Laser-Cutting-Drilling-Marking-and-Engraving-Market-by-Technology-Co2-Laser-Excimer-Laser-ND-YAG-Laser-Fiber-Laser-Base-Material-Metals-Polymers-Application-Electronics-Machine-Part-Marking-Medical-Signage-Geography-2013-2018-2144-113>
  
US$ 4,650.00
$  £  €
Have a Question?

Any questions about the report you're considering? Our Customer Service Team can help! Or visit our FAQs.

More Research

Search all our Market Research from one place.